Detailed introduction of fuel injection nozzle in 1 Ton Oil-fired Steam Boiler
The fuel oil enters the furnace through the burner of the boiler. At this time, it is a kind of fog oil drop, it is easier to mix with the impurity in the air, so the injector is used at this time, take a look at the brief introduction of the injector together.
Working principle of injector
The nozzle itself is a normally closed valve. When a valve needle moves up and down to control the valve's opening and closing, its voltage signal will cause the current to flow through the coil in the injector to produce a magnetic field to draw the needle up, so that the valve can be opened so that the fuel can be ejected from the injection hole.
Nozzle characteristics
His greatest advantage is that the fuel engine provides a very accurate fuel engine, because the fuel is turned into gas after the combustion furnace, and the efficiency of the fuel injector is relatively high. Fuel-fired boiler can not only use fuel nozzle, but also can speed up the process of fuel combustion and ensure a certain safety.
The above is the analysis of the "Detailed introduction of Fuel injection nozzle in 1 Ton Oil-fired Steam Boiler". I hope it will be useful to everyone.
