Condensing industrial boilers have unique product advantages, and have a high reputation and evaluation in many industries and fields. Such results are obtained through unremitting efforts as professional condensing industrial boilers. Of course, we all know that condensing industrial boilers are very easy to use, but to understand that good use is based on knowing how to use correctly, the following is a brief introduction to the use of a few points for attention.
Before installing the condensing industrial boiler, the specified additive must be used to clean the pipeline system, and the neutral acid-free and alkali-free cleaning agent must be used in strict accordance with the manufacturer's instructions. Because the condensation industrial boiler is made of silicon, aluminum and magnesium alloy, if the water supply is strongly alkaline in use, then the industrial boiler is very likely to be corroded, so according to the regulations, The H value of industrial boiler water supply should be within a certain range.
The matters needing attention in use must be installed filter in condensing industrial boiler, otherwise it will lead to damage to industrial boiler. Before the operation of industrial boiler, water should be recycled for a certain period of time to remove impurities in the system. At the end of the operation of the condensing industrial boiler, the safety discharge valve must be opened to remove impurities, no matter how much oxygen is added, a small impurity separator must be used. Moreover, the system backwater pipe of condensing industrial boiler must be in accordance with the filter to prevent impurities or sludge from blocking the system and damage the industrial boiler.
The following precautions shall be taken to maintain the condensing industrial boiler as required, and the problem shall be solved immediately, and further damage to the system shall be avoided, and the antifreeze shall not be added to the water. The new system of the condensing industrial boiler shall be thoroughly washed, and the residue such as flux, grease, metal scraps and the like generated during installation shall be removed. If it is the old system, it should be noted that the metal oxide and other corrosive residues shall be removed again to ensure the complete emptying of all low-order points of the system.
The above points for attention are the key contents to be described in this paper, as long as we really want to make full use of condensing industrial boilers, these contents must be understood and memorized. Domestic professional condensing industrial boilers will be introduced in detail before and after the purchase of consumers, and the detailed use guidance teaching will be carried out when the products are sent to consumers.
