In the engineer design stage, the boiler has design efficiency, but in general, the actual operation is similar to the initial design thermal efficiency. For example, the efficiency of oil-fired boilers is greater than 94%, and the efficiency of gas-fired boilers may usually be greater than 100%. However, the boiler efficiency is not fixed. If your equipment's operating efficiency is lower than t...
Learn More
Whether it is a steam boiler or a hot water boiler, after the boiler is installed, a hydraulic pressure test (that is, water pressure) must be performed. After long distance transportation, loading and unloading, installation, collision and damage are unavoidable. Boiler defects can be found through water pressure tests and corresponding measures can be taken in time to ensure the safe operation o...
Learn More
Energy efficiency testing of industrial steam boilers is a very important and authoritative test for boiler manufacturers and boiler customers. First, it tests whether the performance indicators of boiler manufacturers' products have reached the guaranteed value test. Then, it can clarify the main factors that affect the results of energy efficiency testing, and by analyzing the influencing facto...
Learn More
1. The water pressure test should be carried out when the surrounding air temperature is higher than 5 ℃, and antifreeze measures must be taken when the temperature is lower than 5 ℃. The water used for the water pressure test should be kept at a temperature higher than the surrounding dew point to prevent condensation on the surface of the industrial steam boiler. It may be confused with the oc...
Learn More
Sewage discharge should be carried out when the industrial steam boiler is under fire or low load, and it should be carried out shortly and intermittently;...
Learn More
The combustion method of industrial boilers is one of the factors we will definitely consider when selecting boilers. Let me share it for everyone. Diffusion combustion Advantages: This method of combustion is not to pre-mix, but to diffuse the gas at the nozzle mouth, and then burn it. The combustion method is relatively simple, and the flame is relatively stable....
Learn More